Get Connected!
Come and join our community. Expand your network and get to know new people!
Hello! I resolved it by installing Ubuntu instead of Raspiberry OS. In Rasp the only drive that appeared was the simulator. This time the indi drivers were loaded correctly. Thanks.
Read More...
I get the artifacts on the skymap also using both Remmina and TigerVNC.
.
When using VNC over the Stellarmate Hotspot, the VNC connection eventually freezes up and the connection becomes unusable. This only happens with the Skymap over the Hotspot using any VNC program. .
.
If I connect the Rpi to my home network or the mount's handset's router via WiFi or if I plug an ethernet cable directly into the Rpi, then it works normally - with the artifacts.
.
If I can stay away from the Skymap and use only the Ekos and INDI driver pages, then the VNC connection over Hotspot works reasonably well. But once I go to the skymap then the Rpi side freezes and needs to be power cycled.
.
I believe this freezing is happening to only the graphics system since ekos and INDI still operate the mount and cameras normally. I just cannot access any controls. I can still SSH normally into the Rpi and run command line tools such as htop.
Read More...
Here are screenshots of my focus Options pages. What directory are the log files stored? Is there a checkbox to select to have ekos generate the detailed log files?
Read More...
Hi Pramod,
Be good a log (with Verbose+Focus set) when you get another chance.
One thing I've noticed is that sometimes when no stars are detected the graph point will have an HFR = -1 and the graph doesn't always rescale to show the -1 (not sure exactly why) so it looks like the point is just missing (unless you manually drag the -1 into view).
Read More...
I am striving to greatly reduce, if not eliminate, my MS Windows installations in advance of October 2025. I really do not want to deal with Windows 11 and forcing it to accept my CPUs. I do not plan to buy 7 new computers to make Microsoft feel secure when Linux runs just fine on all of them. Yes, I have 8 computers today, plus 2 Raspberry Pis, and only 1 is Windows 11 "ready". It happens to be one of the slowest CPUs as well! I have managed to migrate all my non-astronomy computers to Linux without issue. I actually find Pix Insight quite a bit faster now!
I have a StarMaster which uses a rather old Sky Commander and Star Tracker hardware made by Sky Engineering. There is an ASCOM driver for this. It was developed by an individual, not a company. As I see it, I have two options.
1. Replace the Sky Engineering boxes with OnStep hardware. This seems quite doable, but far from trivial.
2. Figure out a way to "use" the ASCOM driver.
I will probably continue to run some favorite tools in Wine like SkyTools since I think I'm willing to give up that program being able to directly issue goto commands.
At this point I am gathering options so all crazy thoughts are welcome.
Mark
Read More...
Hmmm.
Humidity is NOT a problem at this time of year in Arizona. But I don’t have a better explanation for why this might be failing. I suppose this contact spray might be worth a try.
Read More...
An example from this evening:
Computer clock: 23 Apr 20:30
KStars: 23 Apr 02:35
This is worse than a water clock. More like a hamster wheel, with a sleepy hamster.
Read More...
I modified the train so the guide device is set to "--".
It was previously set to "Mount".
Thanks to both.
Read More...
Hi John,
I had noticed that in some instances (occured twice for me but couldnt get it to replicate), the focuser would continue to gather more points but the graph never appeared. I had to shutdown and reload Kstars. Dont know if anyone else encountered this
Read More...
Hi Keith,
I thought I'd fixed all instances of focus not reseting properly which is probably what you're referring to. Of course its possible there's a case I've missed or you could be on an old version of kstars?
Read More...
OK, I'll get that information for you later today. Another problem was the autofocus feature "running off" while it was trying to find stars.
.
For example - my system finds focus near "21450" +/- 100 ticks. While searching for and not finding stars, it keeps focusing "outwards" by 1000 ticks every failed autofocus run and the scheduler keeps trying.
.
Is there a way to keep the scheduler and autofocus routine within a reasonable distance of where the last good focus was found?
.
Read More...
