Hello,
I got a new CMOS (Omegon vtec571 = ToupTek ATR3CMOS26000KMA). The INDI Touptek (2.1) driver crashed immediately. I have generated a logfile. What can I do?
Thomas

Hi
Try the Omegon-AstroShop driver and update the train.
HTH

Thanks for help, but I tried it before.
It crashed either. Maybe it is the same code.

Thomas

Hi. Just curious. Did you aver solve this?
JTOL, the only other issue I had with the veTEC was when changing to a newer sdk.
With the latest 55 series, ours looks like this. Some older (known to work) ones we also kept, just in case.

lrwxrwxrwx 1 root root 21 abr 2 15:23 libomegonprocam.so -> libomegonprocam.so.55
-rw-r--r-- 1 root root 21542824 oct 17 2023 libomegonprocam.so.54.22587
-rw-r--r-- 1 root root 21714968 oct 20 2023 libomegonprocam.so.54.23585
lrwxrwxrwx 1 root root 27 abr 2 15:23 libomegonprocam.so.55 -> libomegonprocam.so.55.24621
-rw-r--r-- 1 root root 22312920 abr 2 15:23 libomegonprocam.so.55.24621

No, we have not solved it yet. The camera is on a remote site. This doubles this troubles. Our next try is to replace the USB cables, which were fine for our previously used ASI183-
Thomas

What do you mean with 55 series. I am not a developer, just an astronomer.

Today we changed USB3 cables and power supply. No change. Still not working. Is there a suggested driver.