Hello,
The system was working just fine until today.
SM 1.5.6, RPI4.
What happened was:
I checked for updates - there was a bunch. Didn't install any.
Took the card out and backed it up.
Put the card back - and boom...
KStars now crashes a couple of seconds after start.
If I start it from the terminal - in the end there's a "segmentation fault" message.
Is there any way to easily fix this?
Thanks!
-- Max S
ZWO AM5. RST-135. AZ-GTI. HEQ5. iOptron SkyTracker.
TPO RC6. FRA400. Rokinon 135 and other lenses.
ZWO ASI2600MC. D5500 modified with UVIR clip-in filter.
ZWO ASI120MM Mini x 2. ZWO 30F4 guider. Orion 50mm guider.
ZWO EAF x 3.
Yes. Strange.
I also performed a backup from inside SM's control panel and moved the backup file to a USB stick..
That's it.
Well, I am just going to restore a good copy of 1.5.5 and update it to 1.5.6.
Thanks!
-- Max S
ZWO AM5. RST-135. AZ-GTI. HEQ5. iOptron SkyTracker.
TPO RC6. FRA400. Rokinon 135 and other lenses.
ZWO ASI2600MC. D5500 modified with UVIR clip-in filter.
ZWO ASI120MM Mini x 2. ZWO 30F4 guider. Orion 50mm guider.
ZWO EAF x 3.