Extracted from the log:

INFO 0.005824 sec : Session log file /Users/domeuser/.indi/logs/2018-05-25/indi_vantage_weather/indi_vantage_weather_19:38:27.log
DEBUG 86.344753 sec : Connecting to /dev/cu.SLAB_USBtoUART
DEBUG 86.350395 sec : Port FD 3
DEBUG 86.350429 sec : Connection successful, attempting handshake...
DEBUG 86.350737 sec : CMD (0XA)
DEBUG 86.355740 sec : Console is awake.
DEBUG 86.356104 sec : CMD (VER)
DEBUG 86.371693 sec : RES (Oct 26 2009)
INFO 86.371770 sec : Vantage is online.
DEBUG 86.372615 sec : Configuration successfully saved for DEVICE_PORT.
DEBUG 86.373335 sec : Configuration successfully saved for DEVICE_BAUD_RATE.
DEBUG 86.374014 sec : Configuration successfully saved for CONNECTION_MODE.
INFO 86.374236 sec : Weather update is in progress...
DEBUG 86.374538 sec : CMD (0XA)
DEBUG 86.379746 sec : Console is awake.
DEBUG 86.380282 sec : CMD (LOOP 1)
DEBUG 86.440158 sec : Packet Type (0)
DEBUG 86.440230 sec : Raw Forecast (6)
INFO 86.440253 sec : Forecast: Partly Cloudy.
DEBUG 86.440280 sec : Raw Temperature (716) [0XCC 0X2]
DEBUG 86.440301 sec : Raw Barometer (30025) [0X49 0X75]
DEBUG 86.440320 sec : Raw Wind Speed (3) [0X34]
DEBUG 86.440339 sec : Raw Wind Direction (166) [0XA6, 0]
DEBUG 86.440358 sec : Raw Rain Rate (0) [ 0, 0]
DEBUG 86.440377 sec : Raw Solar Radiation (32767) [0XFF,0X7F]
WARNING 86.440400 sec : Warning: Parameter Forecast value (1) is in the warning zone!
DEBUG 86.440488 sec : Toggle Debug Level -- Driver Debug
DEBUG 87.348213 sec : Toggle Debug Level -- Driver Debug
DEBUG 87.348290 sec : Toggle Logging Level -- Driver Debug

Interesting that while it is reporting a value for wind direction and solar radiation, Ekos (and PyINDI) are reporting zeros. Plus, mostly I really need humidity to monitor dew point, and that's also zero, and "not* showing up in the log. And one more little data point, in the Ekos Main Control tab, for "Status", only temperature, wind, and rain are shown with their status lights. For what that's worth...

Thank you!

Read More...