Here's what appears after plugging in the camera. This is on the RPi, running Raspian Jessie:
[176.993219] usb 1-1.2: new high-speed USB device number 12 using dwc_otg
[177.093691] usb 1-1.2: New USB device found, idVendor=1618, idProduct=6000[177.093721] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0[177.270761] usb 1-1.2: USB disconnect, device number 12[179.043205] usb 1-1.2: new high-speed USB device number 13 using dwc_otg
[179.143684] usb 1-1.2: config 1 interface 0 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64[179.144139] usb 1-1.2: New USB device found, idVendor=16c0, idProduct=2972[179.144161] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0[179.144178] usb 1-1.2: Product: QHY-8 V10
[179.144195] usb 1-1.2: Manufacturer: QHYCams
Linux Mint 20.3 and AstroBerry
Mounts: iOptron CEM-60
Cameras: Atik 383L+, ZWO ASI290MM Mini
Focuser: Moonlite
Ok, we can try that, but we need to agree on a time. I am UTC-5, US Eastern time. I suspect you are in Europe (oops, Kuwait I see). Unless you stay up very late, I may not be available until the weekend.
On the other hand, if there's anything else you can suggest, I'm up for it. I'd even try running indiserver in the debugger if you had some tips for that.
Charles
Linux Mint 20.3 and AstroBerry
Mounts: iOptron CEM-60
Cameras: Atik 383L+, ZWO ASI290MM Mini
Focuser: Moonlite
Last edit: 8 years 5 months ago by Charles Wright. Reason: Correction