×

INDI Library v1.9.9 Released (30 Nov 2022)

Bi-monthly INDI Library released with new drivers and bug fixes.

Kstars crash on platesolve (and guide) [SOLVED]

  • Posts: 419
  • Thank you received: 73
I've seen similar problems posted previously but don't see a solution.
I just updated my OS from ubuntu 18.04 to 20.04 and since doing this. Kstars crashes just after capturing an image in the align (solver).
Possible some conflicting versions of libraries that do source extraction.

Back trace pasted below. Would anyone know what I've done wrong? thanks

(gdb) bt
#0 0x00007ffff4f9ef26 in ?? () from /usr/lib/x86_64-linux-gnu/libQt5Core.so.5
#1 0x00007ffff68282eb in InternalExtractorSolver::runSEPExtractor() () from /usr/lib/x86_64-linux-gnu/libstellarsolver.so.2
#2 0x00007ffff6834968 in ExternalExtractorSolver::extract() () from /usr/lib/x86_64-linux-gnu/libstellarsolver.so.2
#3 0x00007ffff683b39c in ExternalExtractorSolver::run() () from /usr/lib/x86_64-linux-gnu/libstellarsolver.so.2
#4 0x00007ffff4f9e9d2 in ?? () from /usr/lib/x86_64-linux-gnu/libQt5Core.so.5
#5 0x00007ffff6b0b609 in start_thread (arg=<optimized out>) at pthread_create.c:477
#6 0x00007ffff4869133 in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:95
Celestron C11 iOptron CEM120 Atik 383L
HP8300 Elite i5 running Xubuntu, Indi, Kstars & Ekos
Roll off roof observatory
Battling Irish weather
github.com/dokeeffe
twitter.com/BallyhouraStars
Last edit: 3 months 1 week ago by Derek.
3 months 1 week ago #85702

Please Log in or Create an account to join the conversation.

  • Posts: 419
  • Thank you received: 73
Solved by reinstalling kstars and removing libstellarsolver.
Ran the following 3 commands and all ok now


sudo apt-get remove kstars-bleeding
sudp apt-get remove libstellarsolver
sudo apt-get install kstars-bleeding
Celestron C11 iOptron CEM120 Atik 383L
HP8300 Elite i5 running Xubuntu, Indi, Kstars & Ekos
Roll off roof observatory
Battling Irish weather
github.com/dokeeffe
twitter.com/BallyhouraStars
3 months 1 week ago #85752

Please Log in or Create an account to join the conversation.

Time to create page: 0.149 seconds