First, I am new to Indi and its usage. I am having difficulty in having my SV405CC working with Astroberry. I am having a Raspberry Pi4B with 8 GB and have flashed Astroberry on a 32 GB SD card. Also following directions from various learning sources, have updated, upgraded basic Indi and 3rd party drivers etc. At first when I make my profile in EKOS with my various equipment and run INDI all seems to be connecting fine. I attempted to make from test images with my SV405CC of 120 sec exposure. While running this test imaging session it was attempting to download 1st image but not able to. I was trying to save image on memory stick connected to Pi. I aborted the imaging session and rebooted the Pi and after that my SVBony4055 is not getting connected. I have tried reimaging Astroberry and entire process was repeatable. Also if I use by DSLR in place of SVBony405CC, every thing just runs fine. my set up is as below:
Mount - iOptron CEM40G
Camera - SV405CC connected to WO-Z81
Focuser - ZWO-EAF

Camera is connected to USB port of the mount and powered by power port from the mount.
Mount is connected USB hub.
Focuser is connected to USB hub.
USB hub is connected to Pi.
Memory stick is connected to Pi.

The very same set up just works fine on Windows with Astro Photography tool. So no issues appears to be Camera or its firmware. Perhaps issue is with INDI driver or some configuration or some setup issues on pi.

Read More...