Not sure if this is the right place to ask this question. But, I am trying to connect my Celestron hand controller to my 2020 M1 Macbook via USB but EKOS cannot detect the hand controller.
Currently, I have a USB-C to USB hub converter (UBS-C converter with one USB-3.0 and 2 USB-2.0 ports) that is connected to NexStar+ hand controller. In the System Information (System Information output underneath), I do see a USB-Serial controller connected and it goes away when I disconnect the controller from the converter. In the INDI control panel, I don't see any system ports that correspond to the USB-Serial converter. I know the USB hub is working because I can detect storage USBs as well as use the Canon camera on Windows VM.
Is this an issue with INDI or a limitation with MacOS?
USB 3.1 Bus:
Host Controller Driver: AppleT8103USBXHCI
USB2.0 Hub :
Product ID: 0x2817
Vendor ID: 0x2109 (VIA Labs, Inc.)
Version: 90.14
Serial Number: 000000000
Speed: Up to 480 Mb/s
Manufacturer: VIA Labs, Inc.
Location ID: 0x00100000 / 1
Current Available (mA): 500
Current Required (mA): 0
Extra Operating Current (mA): 0
USB2.0 HUB:
Product ID: 0x7250
Vendor ID: 0x214b
Version: 1.00
Speed: Up to 480 Mb/s
Location ID: 0x00140000 / 2
Current Available (mA): 500
Current Required (mA): 100
Extra Operating Current (mA): 0
USB-Serial Controller :
Product ID: 0x23a3
Vendor ID: 0x067b (Prolific Technology, Inc.)
Version: 4.05
Serial Number: CTASb118D16
Speed: Up to 12 Mb/s
Manufacturer: Prolific Technology Inc.
Location ID: 0x00144000 / 5
Current Available (mA): 500
Current Required (mA): 100
Extra Operating Current (mA): 0
USB C Video Adaptor :
Product ID: 0x9311
Vendor ID: 0x25a4
Version: 2.01
Serial Number: 000000000001
Speed: Up to 12 Mb/s
Manufacturer: USB C
Location ID: 0x00141000 / 3
Current Available (mA): 500
Current Required (mA): 0
Extra Operating Current (mA): 0
Canon Digital Camera:
Product ID: 0x3218
Vendor ID: 0x04a9 (Canon Inc.)
Version: 0.02
Speed: Up to 480 Mb/s
Manufacturer: Canon Inc.
Location ID: 0x00120000 / 4
Current Available (mA): 500
Current Required (mA): 2
Extra Operating Current (mA): 0
Read More...