Hi, I hope maybe someone has an idea of what's suddenly wrong with my EKOS.

I am running an imaging setup with Raspi 4, ASI294MC, ASI174MM mini, ASI EAF, and iOptron CEM70 without any larger issues - till now.

Recently only the ASI 294MC and the CEM70 appear when I start the respective profile in EKOS. It does not matter how I connect the devices - directly to the Raspi or via a hub (I usually use a powered hub). All devices appear in lsusb and the StellarMate Dashboard. After the issue appeared the first time, upgraded the RasPi and tested it - all worked fine. However, after a restart and new test same issue appears: the ASI 294MC and the CEM70 show up, but no trace of the EAF or the guide cam...

I tried different cables, did not help. I made a new profile with a Sony DSLR, QHY guide cam, and CEM70 mount. On the first check, this worked. But when I rebooted the Raspi and tried this profile again, only the CEM70 showed up. Again, similar issue.

I would be glad if someone had an idea of what I could check or do to get it back to a working state.

Best, Nico

Read More...