Been having some issues lately that I need help figuring out. The first 2 are from my desktop running Linux connecting remotely to the Rpi indi server.
1. Occasionally, there is no image train to select despite having Primary and Guiding programmed. See log labeled No Image Train.
2. I've been having issues on and off with failed exposures after focusing with the EAF. Sometimes I can run autofocus with no issues but fail if I use the in or out arrows, other times I can use the arrows but autofocus fails. Mostly any movement of the focuser results in failed exposures. I have to use the indi control panel to disconnect then reconnect the camera to expose again. But as soon as I touch the EAF, failure.
3. Same problems as 1 and 2 but from a freshly installed Stellarmate OS on a Rpi4.
4. Svbony SV305Pro sometimes doesn't load at startup. I'll have to disconnect indi and restart. Sometimes this works, sometimes I'll unplug the usb cable to the camera a few times with 50% success. This is on both systems as well.

I was having the troubles using Astroberry so I purchased and switched to Stellarmate. I have already tried different usb cables with the same results. Both cameras are plugged into the 3.0 outlets with the mount and EAF in the 2.0s. I've tried powered USB 3.0 hubs and non-powered. Could someone look at the logs and tell me what they see? I have no idea how to read them. I can send screen grab videos if needed. Since I've switched operating systems, I'm thinking it's either an issue with the Rpi or something causing miscommunication among the devices and ekos/indi. If it would be best to make separate posts, please let me know and I'll edit.

Read More...