To start: The camera shutter is set at 1.0 seconds

I start EKOS which opens set at a default Exposure of 1.0000 seconds. I take an image at the default setting, EKOS takes the image, saves and downloads the 1.0 second image to my computer.

The camera shutter is still set at 1.0 seconds.

Using the up arrow I set the exposure in EKOS to 2 seconds. EKOS goes through the motions of taking an image at the supposed 2 second exposure. However the shutter speed on the camera does not change from the 1.0 second setting it had previously, and this the saved and downloaded image is a 1.0 second exposed image, yet the file name says it is a 2 second exposed image.

The problem is EKOS is not able to send the right message to the Nikon 1 V3 to change the shutter speed.

~Terry