Hello,

I have received my first camera QHY 5III462C.
The camera works well with FireCapture 2.6 on Windows 10 after updated with the windows SDK.

However I want to run it on a Raspberry Pi 4B that will stay in the garden and me in my warm house (taking control with VNC viewer).

The camera is not detected by EKOS, I choose the QHY driver in profil and a pop up window appears saying "INDI driver crash" each time I try to establish a connexion.
Also with FireCapture 2.6 for raspberry, the camera is not detected.
Normally I have the latest versions of each of those softwares.

I tried to install the arm 32 bits SDK 20.06.26 which is recommended for the QHY 462. www.qhyccd.com/html/prepub/log_en.html#!log_en.md
I checked if I was on a 32 bits system and yes (armv7l). However I even tried the 64 bits version.

I have followed the process written on the previous link above for RPI to install the SDK.

After using distclean.sh to remove all previous versions, I execute in root mode the install.sh.
It seems to work but I have three information messages :

ldconfig : files /usr/lib/arm-linux-gnueabihf/libsbig.so is troncated
ldconfig : files /usr/lib/arm-linux-gnueabihf/libsbig.so.4 is troncated
ldconfig : files /usr/lib/arm-linux-gnueabihf/libsbig.so.4.9.9 is troncated

I am on a astro distribution called "Easy Astro Box" or eab.

So, if you have some helpful ideas, be nice to share them
If you want other informations let me know. I am a newby on Linux,... so write the command I have to lauch. I just know a few of them.

Also if someone says me the camera works well on an other free distribution, I am open to change my distribution.

Thanks in advance.

Finally I've found by myself.

Quick reminder : I use a Raspberry Pi 4B with an astro distribution called Easy Astro Box based on raspbian busters with Kstars 3.5.0 beta

Here are the commands I've used :
sudo apt update
sudo apt upgrade

Then I've followed the instructions on the webpage : indilib.org/get-indi/download-rpi.html

I've choosen the option 1 to only update the INDI libraries including all third party drivers.

So it works now with EKOS. The version of QHY SDK that I have is 20.8.26.

Maybe it will help some of you.

Now I have to make it work with FireCapture.

If and when you get it working with Firecapture LET US KNOW! I'm wanting to use FireCapture with my QHY183C.

Let us know if you get it working! Want to get my qhy183C running on a raspi with FireCapture