Whats the slew speed set to? I recall on my HEQ5 it seemed to do that too but I found out it was slewing so slowly that it wasnt noticeable. A change of speed sorted it out.
Clear Skies,
Pramod
My kit: SW 130PDS on a HEQ5 Pro mount, ZWO ASI533mc Pro, 30mm guidescope with ASI120mm mini, managed using Kstars/Ekos, RPi with Stellarmate OS, ASI224mc, bits and bobs for visual observations.
My kit: SW 130PDS on a HEQ5 Pro mount, ZWO ASI533mc Pro, 30mm guidescope with ASI120mm mini, managed using Kstars/Ekos, RPi with Stellarmate OS, ASI224mc, bits and bobs for visual observations.
I got the same problem, but with syncing. Ekos take 1 image, platesolve and then sync, the indi says syncing but never complete, all 2 button in plate solve module greyed out. Until I make a slew command the INDI receive synced message and the buttons show up again. Also OnStepX
Nothing odd in the logs, I suspect that the same thing is happening with meridian flips, for some reason, INDI or EKOS isn't receiving a completion signal from the mount. It works in all other respects, and seems to know what the mount is doing at all times except when it sends a slew for the polar alignment and for meridian flip.. weird