INDI Library v1.9.1 Released (26 Jun 2021)

Bi-monthly INDI Library v1.9.1 is released bringing a few new drivers and improvements to existing drivers.

Fits viewer not starting when using main CCD chip.

  • Posts: 41
  • Thank you received: 6
I have some weird phenomena since I installed the latest Kstars, Ekos, indi. Yesterday I played with the autoguiding, so I didn't take pictures with the big chip in the camera, only the autoguiding chip.
Camera is a ST8XME (dual chip).

I think using the guiding chip is somehow blocking the reading from the main chip in the software. When I take an image on the guidechip... It works. When I take an image using the main chip... he stalls.

Basically, I have the following scenarios:

1) Take flats. Go to wall postition (just position in the sky), and take flats, with ADU value 6400.
No fits viewer that is started... In the ekos main log, he only shows "capture in progress".

2) Goto object and track, focus, align.
Here too he doesn't start the fits viewer for preview. In fact... it seems like nothing happens and the program is stuck in the "focus stage".

3) On the other hand, when I use the guidechip... it seems to work!
When I do "goto object" and only select the "guide" option, then he DOES start the fits viewer and continue with the program.

4) When I click simply in the "focus" tab on "capture", to capture an image, he doesn't show the fits viewer either (with main chip)

5) When I go to exposure, make a sequence, and click on "preview", then he stucks on "downloading".
(for this I attached an attachment).

File Attachment:

File Name: log_13-09-16.txt
File Size:20 KB

4 years 10 months ago #10203

Please Log in or Create an account to join the conversation.

  • Posts: 41
  • Thank you received: 6
And it becomes weirder and weirder. I restarted the laptop, then took an image with the guider. Then with the fits viewer open, I took an image on the focus-tab. He showed suddenly the fits viewer, then a hardcrash (log see attachment).

When I restart kstars, indi and ekos and take a manual image, it works on both the guider and the imager chip. But... he only shows a black screen (grey when stretched). This only occured after the hardcrash.

Restart on windows, and maxim-dl shows that the camera is working without a problem. Then reboot back on linux, and when I take an frame on the imager or the guiderchip, he only shows a black screen. Probably a darkframe?

The log in the attachment suggests that the issue is something with the new dark library. Maybe this is the cause of the problem?
4 years 10 months ago #10206

Please Log in or Create an account to join the conversation.

Time to create page: 0.506 seconds