i am trying to connect my equipment EKOS indi on raspberry pi 2 (ubuntu mate), i did all the steps and instruction that i read in this TOPIC: Mobile astrophotography with RPi2
topic
, and the installation was done perfectly. the problem now i'm not abling to start indi and connect my equipment with kstars on the raspberry pi 2 directly or ' through power USB hub, i don't know what i missed ( driver or setting ) or did it wrong, my equipment that i use :
1. neq6 mount
2. qhy9s ccd
3. qhycfw2 filter wheel
4.qhyl5 m guiding cam
5. indreno foucser
please advice's me on how to diagnose the problem
Hi
thank you for replying
the symptoms, i can not connect the my equipment when i start indi in kstars,and i will explanation the procedure that i done
1- i hock up my equipment through power USB hub to raspberry pi 2
2- i start up kstars i go to tools ,to Ekos
3- i select my equipment ( qhy9s , eqmod , qhy5l and moonlit foucser)
4- i Click start indi ( indi do not start )???
i thank is there a issue with installing indi with kstars
I've had some issues myself also with raspberry pi2. Not quite setup like Yours - I use raspberry only for indiserver.
Anyway what I have experienced
1. I need to plug in everything before i power up raspberry otherwise some of the hardware does not work
2. I had to allow higher amperage on usb ports (www.raspberrypi.org/forums/viewtopic.php?f=46&t=102634) otherwise i got really unexpected behavior - this might not be the case for You.
First check if all devices work and connect properly. Second make sure You load proper drivers with indiserver.