Hi. I have installed the last Kstar version on Raspebrry OS and ekos is unable to connect to EQ6 mount by USB cable. These is my configuration:

pi@raspberrypi:~ $uname -a
Linux raspberrypi 6.1.0-rpi8-rpi-v8 #1 SMP PREEMPT Debian 1:6.1.73-1+rpt1 (2024-01-25) aarch64 GNU/Linux

pi@raspberrypi:~ $ lsusb
Bus 001 Device 024: ID 2109:2817 VIA Labs, Inc. USB2.0 Hub
Bus 001 Device 023: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port / Mobile Phone Data Cable

pi@raspberrypi:~ $ ls /dev/serial/by-id/usb-Prolific_Technology_Inc._USB-Serial_Controller-if00-port0

Does the issue depend on the kernel? Can you help, me please?
Regards,
Sergio

It looks like the serial port is detected fine, where does it fail exactly to connect? any specific messages?

I have solved.
See www.indilib.org/forum/general/14511-solv...-help-me.html#100001

This thread was opened with Ubuntu OS.