×
INDI Library v1.8.3 Released (02 Jan 2020)

Minor monthly bugfix release with a new RainbowAstro mount driver and improved pier side simulation.

Meridian flip issue with the scheduler

9 months 4 weeks ago
wvreeven
Platinum Boarder
Platinum Boarder
Posts: 1187
Karma: 6
More
Topic Author
Meridian flip issue with the scheduler #37113
My next course of action: purge all KStars and INDI config files (well, store them in a safe place first) and recreate them. New profile, new config of KStars, new download of UCAC stars, etc. See if that helps.

ASI1600MM-Pro Cooled and filter wheel with a SkyWatcher Esprit 80 ED on a SkyWatcher HEQ5-Pro

ASI1600MM-Pro Cooled and filter wheel with an 8" TS Ritchey-Chrétien on a SkyWatcher EQ6-R

Please Log in or Create an account to join the conversation.

9 months 4 weeks ago
wvreeven
Platinum Boarder
Platinum Boarder
Posts: 1187
Karma: 6
More
Topic Author
Meridian flip issue with the scheduler #37118
All configuration files were backed up and I created a new profile. I discovered two strange things though:
- In KStars under Data -> download New Data it is shown that all previously downloaded additional data catalogs are installed, including Tycho2 and USNO, but this is not the case. It seems I have overlooked a config file. Can someone tell me where that info is stored?
- When trying to set the Park Position, the EQMod driver crashed. Everytime I started KStars and then Ekos and then INDI, the EQMod driver would crash. It turned out that the ParkData.xml file was corrupt and when I restored the one from the back up, the driver didn't crash anymore.

Moreover, I just (re?) discovered this config setting:



and I don't remember if it was ticked or not. Anyway, I am good to go for tonight and I will report tomorrow if all is back to normal now or not.


Happy meridian flipping!

Wouter

ASI1600MM-Pro Cooled and filter wheel with a SkyWatcher Esprit 80 ED on a SkyWatcher HEQ5-Pro

ASI1600MM-Pro Cooled and filter wheel with an 8" TS Ritchey-Chrétien on a SkyWatcher EQ6-R
Attachments:

Please Log in or Create an account to join the conversation.

9 months 4 weeks ago 9 months 4 weeks ago by sterne-jaeger.
sterne-jaeger
Platinum Boarder
Platinum Boarder
Posts: 420
Karma: 6
More
Meridian flip issue with the scheduler #37121
Good point, Jasem, I have to think about how to abort safely. Do you have the log file available?

Wolfgang

TSA-120 + FSQ-85 + GSO 150/750 | Avalon Linear + M-zero | Moravian G2-8300 + ASI 1600mm pro + ASI 294mc pro | KStars/INDI on Raspberry Pi 4 with Raspbian 10

Please Log in or Create an account to join the conversation.

9 months 4 weeks ago
sterne-jaeger
Platinum Boarder
Platinum Boarder
Posts: 420
Karma: 6
More
Meridian flip issue with the scheduler #37122

wvreeven wrote: Moreover, I just (re?) discovered this config setting

It should't matter, but good to know that it was set.

Wolfgang

TSA-120 + FSQ-85 + GSO 150/750 | Avalon Linear + M-zero | Moravian G2-8300 + ASI 1600mm pro + ASI 294mc pro | KStars/INDI on Raspberry Pi 4 with Raspbian 10

Please Log in or Create an account to join the conversation.

9 months 4 weeks ago
wvreeven
Platinum Boarder
Platinum Boarder
Posts: 1187
Karma: 6
More
Topic Author
Meridian flip issue with the scheduler #37123
Ah pity. Well I don’t remember if it was set before or not but now it is. I am running a new test now. No scheduler, only the Sequence queue because Jasem reported problems with it as well. Last night the first meridian flip went OK but the second not (both were done via the Scheduler) so let’s see how tonight goes.


Wouter

ASI1600MM-Pro Cooled and filter wheel with a SkyWatcher Esprit 80 ED on a SkyWatcher HEQ5-Pro

ASI1600MM-Pro Cooled and filter wheel with an 8" TS Ritchey-Chrétien on a SkyWatcher EQ6-R

Please Log in or Create an account to join the conversation.

9 months 4 weeks ago
sterne-jaeger
Platinum Boarder
Platinum Boarder
Posts: 420
Karma: 6
More
Meridian flip issue with the scheduler #37124

wvreeven wrote: Last night the first meridian flip went OK but the second not (both were done via the Scheduler) so let’s see how tonight goes.

I am trying to reproduce it in a test environment. Could you please post your scheduler file where the MF failed?

Wolfgang

TSA-120 + FSQ-85 + GSO 150/750 | Avalon Linear + M-zero | Moravian G2-8300 + ASI 1600mm pro + ASI 294mc pro | KStars/INDI on Raspberry Pi 4 with Raspbian 10

Please Log in or Create an account to join the conversation.

9 months 4 weeks ago
sterne-jaeger
Platinum Boarder
Platinum Boarder
Posts: 420
Karma: 6
More
Meridian flip issue with the scheduler #37125

wvreeven wrote: I am running a new test now. No scheduler, only the Sequence queue because Jasem reported problems with it as well.

Without a scheduler, there will be no re-alignment. Guiding should be restarted if it is running in that moment when the MF starts.

Wolfgang

TSA-120 + FSQ-85 + GSO 150/750 | Avalon Linear + M-zero | Moravian G2-8300 + ASI 1600mm pro + ASI 294mc pro | KStars/INDI on Raspberry Pi 4 with Raspbian 10

Please Log in or Create an account to join the conversation.

9 months 4 weeks ago
wvreeven
Platinum Boarder
Platinum Boarder
Posts: 1187
Karma: 6
More
Topic Author
Meridian flip issue with the scheduler #37127

sterne-jaeger wrote:

wvreeven wrote: Last night the first meridian flip went OK but the second not (both were done via the Scheduler) so let’s see how tonight goes.

I am trying to reproduce it in a test environment. Could you please post your scheduler file where the MF failed?

Wolfgang


Thanks! It is attached to one of my previous comments. The one with the logs of last night.

ASI1600MM-Pro Cooled and filter wheel with a SkyWatcher Esprit 80 ED on a SkyWatcher HEQ5-Pro

ASI1600MM-Pro Cooled and filter wheel with an 8" TS Ritchey-Chrétien on a SkyWatcher EQ6-R

Please Log in or Create an account to join the conversation.

9 months 4 weeks ago
sterne-jaeger
Platinum Boarder
Platinum Boarder
Posts: 420
Karma: 6
More
Meridian flip issue with the scheduler #37128
Wouter, I think I found your problem. During the meridian flip, the scheduler runs into a timeout:
[2019-03-28T22:48:01.657 CET DEBG ][ org.kde.kstars.ekos.scheduler] - capture module timed out. Restarting request...
The Scheduler does not know about the meridian flip, the meridian flip is handled by the mount module in cooperation with the capture module.

That explains why the capture sequence is started from the beginning and at the same time why there is no re-alignment. The latter is the case since the scheduler thinks that the capture module runs into a timeout and tries to restart the capture.

I have to find out, what the root cause for this timeout is.

Wolfgang

TSA-120 + FSQ-85 + GSO 150/750 | Avalon Linear + M-zero | Moravian G2-8300 + ASI 1600mm pro + ASI 294mc pro | KStars/INDI on Raspberry Pi 4 with Raspbian 10

Please Log in or Create an account to join the conversation.

9 months 4 weeks ago
wvreeven
Platinum Boarder
Platinum Boarder
Posts: 1187
Karma: 6
More
Topic Author
Meridian flip issue with the scheduler #37129
OK I forgot about that so thanks for reminding me. I am running a scheduled job on M 67 now. It will culminate at 21:41 CET and I expect the meridian flip 30 minutes later. I’ll let you know how it went.

ASI1600MM-Pro Cooled and filter wheel with a SkyWatcher Esprit 80 ED on a SkyWatcher HEQ5-Pro

ASI1600MM-Pro Cooled and filter wheel with an 8" TS Ritchey-Chrétien on a SkyWatcher EQ6-R

Please Log in or Create an account to join the conversation.

9 months 4 weeks ago
sterne-jaeger
Platinum Boarder
Platinum Boarder
Posts: 420
Karma: 6
More
Meridian flip issue with the scheduler #37130

wvreeven wrote: Thanks! It is attached to one of my previous comments. The one with the logs of last night.

I mean the scheduler file, not the capture file.

TSA-120 + FSQ-85 + GSO 150/750 | Avalon Linear + M-zero | Moravian G2-8300 + ASI 1600mm pro + ASI 294mc pro | KStars/INDI on Raspberry Pi 4 with Raspbian 10

Please Log in or Create an account to join the conversation.

9 months 4 weeks ago
wvreeven
Platinum Boarder
Platinum Boarder
Posts: 1187
Karma: 6
More
Topic Author
Meridian flip issue with the scheduler #37131
Rrrrright! I didn’t save that. I’ll do so now in case the meridian flip fails again.

ASI1600MM-Pro Cooled and filter wheel with a SkyWatcher Esprit 80 ED on a SkyWatcher HEQ5-Pro

ASI1600MM-Pro Cooled and filter wheel with an 8" TS Ritchey-Chrétien on a SkyWatcher EQ6-R

Please Log in or Create an account to join the conversation.

Time to create page: 0.515 seconds