after careful study in the webpage - indi ZWO: (www.indilib.org/individuals/devices/came...ics-asi-cameras.html)
I find that in ZWO page => option page
there should be a row : "telescope" where there are 2 option : primary or guide
however, my Indi control panel without this row - "telescope" row
why?
installation incorrectly ?
because I only add 1 cam in this moment ? (my image cam will be come in the middle of April)
there is some setting I need to set then the "telescope" row will be appear ?
thanks
Read More...
Sorry, I am a new user.
where can I find "second image train ?
in indi control panel ? in EQ MOD page or in ZWO ASI120mm page ?
thanks
Read More...
Hiya,
In short : how to set up my ZWO 120mm mini (CMOS) as my Guidescope ?
I have sucessfully connected both EQ5-Pro and ASI 120mm mini to INDI server, they were showed on the INDI Control Panel.
However I don't know how to tell the system that "the ASI 120mm is set to be the Guidescope"?
my system:
Hardware :
EQ5-Pro, ASI 120mm mini
Raspberry Pi4B with Samsung 2T SSD
EQMOD direct by TTL-USB (bypass SynScan hand-control)
Software :
OS: Ubuntu Server 22.04, Lxde desktop environment
INDI-server, KStars
I intend to use PHO2 later but now try "internal guiding" at first.
Thank you
Read More...
I intend to wake up the INDI Web manager and
1. "mode" selected : remote
2. Host : 192.168.xx.yy (IP of my rpi4B-ubuntuServer with KStars/EKos/INDIserver)
3. Port : 7624
unlucky, still not work, and also cannot not be connected.
When I set in local mode, return to normal.
Thanks
Read More...
Hiya, I am a new user
in short :
I try to following the YouTube tutor for beginner and find that my Firefox cannot establish a connection to the INDI server
It is a function under : EKos => 1.Select Profile =
Mode : Remote , Host : localhost, port 7624
Guiding : Internal
"ticked" INDI Web Manager
when I tick "Web Manager
Friefox Browser started up but cannot reach the web manager
My system :
1. Raspberry Pi4B with ubuntu server 22.04 and LXDE, KStars, direct EQMOD and ASI1200mm as Guidescope
2. ISP Router with Google Mesh, (port forward not yet set for this RPi4B, do you think I need to set it ?)
Thanks
Read More...
How to check the INDI lib version ? I just downloaded it from website by this command :
sudo apt-get install libindi1 indi-bin
Read More...
I am not sure how to check if INDI server is running ?
I can start the interface of EKos and edit the profile, but I don't think I have "start the INDI server" thru EKos.
Could you mind to tell me the actual procedure ?
Read More...
Max, thanks for your reply
Sorry that my poor English and actually the problem is that :
"settings =>ToolbarsShown => INDI Toolbar" is ticked and the INDI icon shown in toolbar is blurred and cannot be selected.
and
"Tools => Devices => INDI Control Panel" is also blurred and cannot be selected.
My problem is still not being solved.
Thanks
Read More...
Hiya, I'm a very freshman
In short : the selection " INDI Control Panel" is burred in my Kstars menu under "Tools"
and this is my first time to check my mount is connected to my computer or not.
Actually, this is my first time to ensemble my equipments:
1. Raspberry PI4B in ubuntu server 22.04 with LXTE, KStars and EQMOD were installed
2. EQ5 - pro is connect to the RPi4B by a DIY direct cable (RJ45 to TTL-USB) by www.williamliphotos.com/diy-eqdir
thanks
Read More...
Sorry that may be off topic. I cannot start a new topic to ask sth about installation, so i try to check that can i reply some topic . check function
Read More...