I've also got the problem with offset being 31 max but I haven't tried gain adjustment yet

Hi everyone
I have the Omegon veTEC571. Connecting using the omegonpro driver, I don't see the offset issue and all the other stuff works too. I wonder if the Omegon and other Touptek re-badged models really do use the same code?
The libraries seem different. Here are the listings built from NOU's scripts for the current stable:

steve@steve-desktop:/usr/lib/x86_64-linux-gnu$ ls -l libtoup*
lrwxrwxrwx 1 root root 16 abr 5 18:45 libtoupcam.so -> libtoupcam.so.53
lrwxrwxrwx 1 root root 22 abr 5 18:45 libtoupcam.so.53 -> libtoupcam.so.53.22376
-rw-r--r-- 1 root root 44632232 may 5 14:19 libtoupcam.so.53.22376

steve@steve-desktop:/usr/lib/x86_64-linux-gnu$ ls -l libomegon*
lrwxrwxrwx 1 root root 21 abr 5 18:44 libomegonprocam.so -> libomegonprocam.so.53
lrwxrwxrwx 1 root root 27 abr 5 18:44 libomegonprocam.so.53 -> libomegonprocam.so.53.22376
-rw-r--r-- 1 root root 21501992 may 5 14:19 libomegonprocam.so.53.22376

Can anyone confirm?
Cheers and clear skies,
Steve

For OpenSUSE tumbleweed using the later release of the RisingCam IMX571 (colour)

ls -l libtoup*
lrwxrwxrwx 1 root root 16 May 23 13:30 libtoupcam.so -> libtoupcam.so.53
lrwxrwxrwx 1 root root 22 May 11 16:20 libtoupcam.so.53 -> libtoupcam.so.53.22376
-rw-r--r-- 1 root root 44642257 May 11 16:18 libtoupcam.so.53.22376

ignore the dates as I was playing around with the RisingCam libs

My offset settings are greyed out completely

with my vetec571M the maximum blacklevel is 31, with my vetec571C 256 is possible (my standard) in the INDI Control panel using the Toupcam driver. With the Omegonpro driver both cameras work with 256. It is still not possible to use the offset setting in the EKOS panel.

CS, Markus

Thanks to the authors for their work! Now it is possible to use all camera functions

I measured the parameters for my ATR3CMOS09000KPA camera, with an imx533 sensor.
It may be useful to others, although it needs to be done for each camera.
1. lownoiceHCG
2. lownoiseLCG
3. normalHCG
4. normalLCG

more than half a year later, the offset bug in EKOS is still not fixed. I can set the offset using the INDI panel (disconnect, reconnect, set offset) but it is an annoyance and the value does not get written into the fits header.

CS, Markus

I have absolutely no issues setting offset from Ekos. It's set correctly in the driver like other cameras. This is Astroshop Omegon but it's using the base Touptek driver.

SORRY Jasem, my fault! just found the error, I had an old version of the toupbase driver in /usr/local/bin and this one got executed. I believe I did this at some point to avoid another error in the official release. Now I make use of the latest driver in /usr/bin and everything is fine.
Again, sorry for the inconvenience.

CS, Markus

Hi
Has anyone had chance to test the latest SDK with 3.6.9? Is all well?

lrwxrwxrwx 1 root root 27 feb 1 06:11 libomegonprocam.so.55 -> libomegonprocam.so.55.24239
-rw-r--r-- 1 root root 22161304 feb 1 06:11 libomegonprocam.so.55.24239

TIA,
Steve

Hi,
I am new on the forum and just a little experience with ekos/indi, running under ubuntu 22.04. I've just purchase the risingcam ATR3CMOS09000KPA.
Everything seems to work fine, but I'm not sure about which parameters to set for this cam.

Do you know if a manual explaining all the available parameters is available ?
If I look to: www.indilib.org/individuals/devices/came...toupcam-cameras.html , the doc is old and doesn't correspond to what I see on my screen (I'm using the last driver release).

If not can you tell/explain me parameters inside the control panel ?

Thank you for your time and your incredible job.

Patrick

Hi everyone
Yes,. A little guiadance and explanation as to what settings to use would be great. These are the settings I have.
Default, apart from the offset: