×

INDI Library v1.7.6 Released. (27 Feb 2019)

First release of 2019 comes with quite a few new drivers across the board along with significant performance improvements to INDI camera and live streaming performance. Many drivers received significant updates to improve performance & stability, while a few were re-written from scratch to be in line with INDI standards. Here are some of the highlights:

Meade DSI III INdI driver

  • Posts: 323
  • Thank you received: 41

Meade DSI III INdI driver was created by AstroNerd

Hi,
I have one of these older Meade DSI III mono cameras which has the same sensor as the Atik 314L+ and I see there is an Meade DSI INdI driver here but only for the version I And II but not the III....

www.indilib.org/devices/ccds/meade-dsi-pro.html

So is anybody able to adapt this driver to work with this camera....or is that not an option, I wish I was clever enough to do it.. :(
Regards
Stellarmate OS on Raspberry pi3b+ controlled with Kubuntu laptop
NEQ6 Pro, belt modded & tuned
Meade series 5000 80mm triplet Apo & Meade 8” SCT (de-forked)
Starlight Xpress SXVR H18, SXVR M25c, Lodestar Guide Camera
Pegasus Ultimate Hub for all USB & Power
Pegasus focus motors on both scopes
1 week 6 days ago #36459

Please Log in or Create an account to join the conversation.

  • Posts: 1550
  • Karma: 18
  • Thank you received: 466

Replied by rlancaste on topic Meade DSI III INdI driver

I think III might be supported. Check this bit of the code:

github.com/indilib/indi/blob/master/3rdp...di-dsi/DsiProIII.cpp
The following user(s) said Thank You: AstroNerd
1 week 5 days ago #36490

Please Log in or Create an account to join the conversation.

  • Posts: 323
  • Thank you received: 41

Replied by AstroNerd on topic Meade DSI III INdI driver

rlancaste wrote: I think III might be supported. Check this bit of the code:

github.com/indilib/indi/blob/master/3rdp...di-dsi/DsiProIII.cpp


Many thanks for taking the time to check this, yes I have now tried the camera and you are correct it does work, and seems to work well and is recognised correctly as DSI III.. :)

There is one setting in the INdI driver I am not sure about though, it is an VPP on and VPP off button labelled DSI III Exposure.... any ideas..??
Stellarmate OS on Raspberry pi3b+ controlled with Kubuntu laptop
NEQ6 Pro, belt modded & tuned
Meade series 5000 80mm triplet Apo & Meade 8” SCT (de-forked)
Starlight Xpress SXVR H18, SXVR M25c, Lodestar Guide Camera
Pegasus Ultimate Hub for all USB & Power
Pegasus focus motors on both scopes
1 week 5 days ago #36503

Please Log in or Create an account to join the conversation.

Time to create page: 0.186 seconds