Hi Dirk:

I am having the same or a similar problem. I'm running on a StllarMate using the latest version 1.46. Connecting using Ekos from my Surface or my MacBook. I've been experimenting all day today. If I use auto temperature regulation I only see the temperature drop to around 12.9°C. Nothing I do will change this. If I remove power from the camera and restart Kstars fresh I can get the manual power setting to work once. As an example if I set power to 100% it will cool down to about -25°C. If I hit auto it goes back to 12.9℃ and can no longer be changed even in manual.

I would love to help but I'm not sure about installing a patch on the StellarMate.

Regards,
Mike

Hello Mike,
What you describe, sounds really weird.
The change is already merged to the source code, so if you update your StellarMate to the latest beta version, it should install itself.
But IMa not sure if that will help. What type of camera are you using?
Can you supply logfiles?


Regards

Dirk

I’m using a miniCAM5F. It worked with older versions of the driver. I’m using the latest stable release on the StellarMate so I may not have the update. Let me check that first and then I will work on getting the logs.

Regards,
Mike

The stable versions are getting updated so no need to switch to beta. Just update in a few hours.

Thanks, updated to latest version this morning. Log file attached if anyone would like to take a look. Note that around #940 I shut off the cooler, set it to 70%. You can see it cool just fine. I then put it in Auto cool for 0.00. Strangely when it auto it always sets the power to 1.8% (3 in actual value).

Regards,
Mike

Hello Mike,

at
[2020-01-01T22:29:01.193 EST DEBG ][ org.kde.kstars.indi] - QHY CCD QHY5LII-C-6137e : "[DEBUG] QHYCCD|QHYCCD.CPP|SetQHYCCDParam|call AutoTempControl|COOLER value = -5.000000 "
[2020-01-01T22:29:01.193 EST DEBG ][ org.kde.kstars.indi] - QHY CCD QHY5LII-C-6137e : "[DEBUG] QHYCCD|MINICAM5BASE.CPP|GetChipCoolTemp|222222222222currentPWM 126.000000 "
[2020-01-01T22:29:01.194 EST DEBG ][ org.kde.kstars.indi] - QHY CCD QHY5LII-C-6137e : "[DEBUG] QHYCCD|MINICAM5BASE.CPP|GetChipCoolTemp|333333333333333currentPWM 126.000000 "
[2020-01-01T22:29:01.194 EST DEBG ][ org.kde.kstars.indi] - QHY CCD QHY5LII-C-6137e : "[DEBUG] QHYCCD|MINICAM5BASE.CPP|GetChipCoolPWM|1111111111111111currentPWM 126.000000 "
[2020-01-01T22:29:01.472 EST DEBG ][ org.kde.kstars.indi] - QHY CCD QHY5LII-C-6137e : "[DEBUG] QHYCCD|QHYCAM.CPP|iTXD_Ex|EndPoint 1 Length 3 "
[2020-01-01T22:29:01.473 EST DEBG ][ org.kde.kstars.indi] - QHY CCD QHY5LII-C-6137e : "[DEBUG] QHYCCD|QHYCAM.CPP|iTXD_Ex|libusb_bulk_transfer ep 1 length 3 trasnfered length 3 "
[2020-01-01T22:29:01.474 EST INFO ][ org.kde.kstars.ekos.capture] - "Cooler is off"
[2020-01-01T22:29:01.486 EST INFO ][ org.kde.kstars.indi] - QHY CCD MINICAM5F-M-70d : "[INFO] Switching to manual cooler control. "
[2020-01-01T22:29:01.491 EST INFO ][ org.kde.kstars.indi] - QHY CCD MINICAM5F-M-70d : "[INFO] Camera is warming up. "
[2020-01-01T22:29:02.194 EST DEBG ][ org.kde.kstars.indi] - QHY CCD QHY5LII-C-6137e : "[DEBUG] QHYCCD|MINICAM5BASE.CPP|GetChipCoolTemp|222222222222currentPWM 126.000000 "
[2020-01-01T22:29:02.196 EST DEBG ][ org.kde.kstars.indi] - QHY CCD QHY5LII-C-6137e : "[DEBUG] QHYCCD|MINICAM5BASE.CPP|GetChipCoolTemp|333333333333333currentPWM 126.000000 "
[2020-01-01T22:29:02.197 EST DEBG ][ org.kde.kstars.indi] - QHY CCD QHY5LII-C-6137e : "[DEBUG] QHYCCD|MINICAM5BASE.CPP|GetChipCoolPWM|1111111111111111currentPWM 0.000000 "
[2020-01-01T22:29:02.197 EST DEBG ][ org.kde.kstars.indi] - QHY CCD MINICAM5F-M-70d : "[DEBUG] CCD T.: 9 (C) Power: 0 (0.00%)


You switched the cooler off, which worked o.k. (Power: 0 (0.00%) )

The you switched to 70% which worked as well:

[2020-01-01T22:29:07.199 EST DEBG ][ org.kde.kstars.indi] - QHY CCD QHY5LII-C-6137e : "[DEBUG] QHYCCD|MINICAM5BASE.CPP|GetChipCoolTemp|222222222222currentPWM 126.000000 "
[2020-01-01T22:29:07.200 EST DEBG ][ org.kde.kstars.indi] - QHY CCD QHY5LII-C-6137e : "[DEBUG] QHYCCD|MINICAM5BASE.CPP|GetChipCoolTemp|333333333333333currentPWM 126.000000 "
[2020-01-01T22:29:07.201 EST DEBG ][ org.kde.kstars.indi] - QHY CCD QHY5LII-C-6137e : "[DEBUG] QHYCCD|MINICAM5BASE.CPP|GetChipCoolPWM|1111111111111111currentPWM 0.000000 "
[2020-01-01T22:29:07.203 EST DEBG ][ org.kde.kstars.indi] - QHY CCD MINICAM5F-M-70d : "[DEBUG] CCD T.: 10 (C) Power: 0 (0.00%) "
[2020-01-01T22:29:07.629 EST INFO ][ org.kde.kstars.ekos.capture] - "Cooler is on"
[2020-01-01T22:29:07.642 EST INFO ][ org.kde.kstars.indi] - QHY CCD MINICAM5F-M-70d : "[INFO] Setting cooler power manually to 70.00% "
[2020-01-01T22:29:08.200 EST DEBG ][ org.kde.kstars.indi] - QHY CCD QHY5LII-C-6137e : "[DEBUG] QHYCCD|QHYCAM.CPP|iTXD_Ex|EndPoint 1 Length 3 "
[2020-01-01T22:29:08.201 EST DEBG ][ org.kde.kstars.indi] - QHY CCD QHY5LII-C-6137e : "[DEBUG] QHYCCD|QHYCAM.CPP|iTXD_Ex|libusb_bulk_transfer ep 1 length 3 trasnfered length 3 "
[2020-01-01T22:29:08.204 EST DEBG ][ org.kde.kstars.indi] - QHY CCD QHY5LII-C-6137e : "[DEBUG] QHYCCD|MINICAM5BASE.CPP|GetChipCoolTemp|222222222222currentPWM 126.000000 "
[2020-01-01T22:29:08.204 EST DEBG ][ org.kde.kstars.indi] - QHY CCD QHY5LII-C-6137e : "[DEBUG] QHYCCD|MINICAM5BASE.CPP|GetChipCoolTemp|333333333333333currentPWM 126.000000 "
[2020-01-01T22:29:08.205 EST DEBG ][ org.kde.kstars.indi] - QHY CCD QHY5LII-C-6137e : "[DEBUG] QHYCCD|MINICAM5BASE.CPP|GetChipCoolPWM|1111111111111111currentPWM 178.500000 "
[2020-01-01T22:29:08.205 EST DEBG ][ org.kde.kstars.indi] - QHY CCD MINICAM5F-M-70d : "[DEBUG] CCD T.: 11 (C) Power: 178 (70.00%) "


Then you requested a temperature of -5C:
[2020-01-01T22:29:28.224 EST DEBG ][ org.kde.kstars.indi] - QHY CCD QHY5LII-C-6137e : "[DEBUG] QHYCCD|MINICAM5BASE.CPP|GetChipCoolTemp|333333333333333currentPWM 126.000000 "
[2020-01-01T22:29:28.225 EST DEBG ][ org.kde.kstars.indi] - QHY CCD QHY5LII-C-6137e : "[DEBUG] QHYCCD|MINICAM5BASE.CPP|GetChipCoolPWM|1111111111111111currentPWM 178.500000 "
[2020-01-01T22:29:28.226 EST DEBG ][ org.kde.kstars.indi] - QHY CCD MINICAM5F-M-70d : "[DEBUG] CCD T.: -10 (C) Power: 178 (70.00%) "
[2020-01-01T22:29:28.344 EST DEBG ][ org.kde.kstars.indi] - QHY CCD MINICAM5F-M-70d : "[DEBUG] Requested temperature is -5, current temperature is -10 "
[2020-01-01T22:29:28.345 EST DEBG ][ org.kde.kstars.indi] - QHY CCD QHY5LII-C-6137e : "[DEBUG] QHYCCD|QHYCCD.CPP|SetQHYCCDParam|call AutoTempControl|COOLER value = -5.000000 "
[2020-01-01T22:29:28.346 EST DEBG ][ org.kde.kstars.indi] - QHY CCD QHY5LII-C-6137e : "[DEBUG] QHYCCD|QHYCAM.CPP|iTXD_Ex|EndPoint 1 Length 3 "
[2020-01-01T22:29:28.347 EST DEBG ][ org.kde.kstars.indi] - QHY CCD QHY5LII-C-6137e : "[DEBUG] QHYCCD|QHYCAM.CPP|iTXD_Ex|libusb_bulk_transfer ep 1 length 3 trasnfered length 3 "
[2020-01-01T22:29:28.348 EST INFO ][ org.kde.kstars.ekos.capture] - "Cooler is off"
[2020-01-01T22:29:28.356 EST INFO ][ org.kde.kstars.indi] - QHY CCD MINICAM5F-M-70d : "[INFO] Switching to automatic cooler control. "
[2020-01-01T22:29:29.220 EST DEBG ][ org.kde.kstars.indi] - QHY CCD QHY5LII-C-6137e : "[DEBUG] QHYCCD|QHYCCD.CPP|SetQHYCCDParam|call AutoTempControl|COOLER value = -5.000000 "
[2020-01-01T22:29:29.221 EST DEBG ][ org.kde.kstars.indi] - QHY CCD QHY5LII-C-6137e : "[DEBUG] QHYCCD|MINICAM5BASE.CPP|GetChipCoolTemp|222222222222currentPWM 126.000000 "
[2020-01-01T22:29:29.224 EST DEBG ][ org.kde.kstars.indi] - QHY CCD QHY5LII-C-6137e : "[DEBUG] QHYCCD|MINICAM5BASE.CPP|GetChipCoolTemp|333333333333333currentPWM 126.000000 "
[2020-01-01T22:29:29.225 EST DEBG ][ org.kde.kstars.indi] - QHY CCD QHY5LII-C-6137e : "[DEBUG] QHYCCD|MINICAM5BASE.CPP|GetChipCoolPWM|1111111111111111currentPWM 126.000000 "
[2020-01-01T22:29:29.225 EST DEBG ][ org.kde.kstars.indi] - QHY CCD MINICAM5F-M-70d : "[DEBUG] CCD T.: -11 (C) Power: 3 (1.18%) "
[2020-01-01T22:29:29.226 EST INFO ][ org.kde.kstars.ekos.capture] - "Cooler is off"

This went completely wrong. It looks like this: COOLER value = -5.000000 does not arrive at the cam... .

But what surprise me is, it almost looks like there are 2 cameras:
QHY CCD QHY5LII-C-6137e
and
QHY CCD MINICAM5F-M-70d

Could there be more than one QHY, Orion etc. product?


Regards

Dirk

Hello Mike,
to my two camera theory:
[2020-01-01T22:40:40.698 EST DEBG ][ org.kde.kstars.ekos] - Disconnecting iOptron CEM25
[2020-01-01T22:40:40.699 EST DEBG ][ org.kde.kstars.ekos] - Disconnecting QHY CCD MINICAM5F-M-70d
[2020-01-01T22:40:40.700 EST DEBG ][ org.kde.kstars.ekos] - Disconnecting QHY CCD QHY5LII-C-6137e
[2020-01-01T22:40:40.700 EST INFO ][ org.kde.kstars.ekos] - "Disconnecting INDI devices..."
[2020-01-01T22:40:40.745 EST DEBG ][ org.kde.kstars.indi] - QHY CCD MINICAM5F-M-70d : "[DEBUG] Closing QHY CCD MINICAM5F-M-70d... "
[2020-01-01T22:40:40.758 EST INFO ][ org.kde.kstars.indi] - iOptron CEM25 : "[INFO] iOptron CEM25 is offline. "
[2020-01-01T22:40:40.762 EST DEBG ][ org.kde.kstars.ekos] - iOptron CEM25 is disconnected.
[2020-01-01T22:40:40.762 EST INFO ][ org.kde.kstars.ekos] - "iOptron CEM25 is disconnected."
...
[2020-01-01T22:40:42.247 EST DEBG ][ org.kde.kstars.indi] - QHY CCD QHY5LII-C-6137e : "[DEBUG] QHYCCD|QHYCCD.CPP|CloseQHYCCD|END return value=0 "
...
[2020-01-01T22:40:42.262 EST INFO ][ org.kde.kstars.indi] - QHY CCD MINICAM5F-M-70d : "[INFO] Camera is offline. "
[2020-01-01T22:40:42.263 EST DEBG ][ org.kde.kstars.ekos] - QHY CCD MINICAM5F-M-70d is disconnected.
[2020-01-01T22:40:42.263 EST INFO ][ org.kde.kstars.ekos] - "QHY CCD MINICAM5F-M-70d is disconnected."
...
[2020-01-01T22:40:43.762 EST INFO ][ org.kde.kstars.indi] - QHY CCD QHY5LII-C-6137e : "[INFO] Camera is offline. "
[2020-01-01T22:40:43.763 EST DEBG ][ org.kde.kstars.ekos] - QHY CCD QHY5LII-C-6137e is disconnected.
[2020-01-01T22:40:43.764 EST INFO ][ org.kde.kstars.ekos] - "QHY CCD QHY5LII-C-6137e is disconnected."

Strange ...

The QHY5L-ll-C is the guide camera.

Hello Mike,
in the profile editor, have you chosen the QHY CCD Driver two times, once for CCD and once for Guider?
If so, leave the guider empty and try again. INDI should start both cameras from the same driver, I think....

If that does not help, try with only the minicam first and see if it works.


Regards

Dirk

Dirk:

First, thank for the help. I tried it with only the QHY CCD Drive picked under CCD. No change. I then disconnected my guide camera and tried it again. I then powered everything off and restarted with only the miniCAM. No go, same error each time. Still setting the power to 1.18% when you select AUTO. Any other ideas? Do I need to update the firmware in my camera? Good thing its clouds and ran for the next 10 days, time to figure this out. Note I was working fine under the previous version of StellarMate. Any chance updating to a RP4 would fix the problems? I'm running a RP3+ right now.

Regards,
Mike

Screen shot of INDI control panel attached.

Hello Mike,
I have really no idea what causes this. I am sure, that a raspberry pi 4 would not change a thing.
When did you say this started? Right after you installed StellarMate 1.46?

Maybe a downgrade to 1.44 or so would help for the time being? I am running my Qhy 8l with another Linux Version an self compiled Indi...
But I have access to a raspberry pi3+ with StellarMate and can test my camera against that over the weekend.

Regards
Dirk

Dirk:

Damn frustrating no? The last time I used StellarMate I was running 1.3.x. I took the time this weekend to upgrade to the latest version and set up my system. I was also working with the new iOS app.

Not sure if I have the older binary around. I tried running the QHY Update Check but it was giving me dll error. Will have to troubleshoot on Sunday now.

Regards,
Mike