ZWO ASI CAM are recognized but not connected #48362
the power supply for the RPi3 comes from a 12V power (230V) adapter through a 12-to-5V converter and has plenty of amps. I do not use any USB hubs.
Today I will setup my RPi4B as a stellarmate computer and try again. Later I will post my experiencec to this board.
ZWO ASI CAM are recognized but not connected #48363
I have never had any problems with the camera untill two days ago. I have tried different versions of Kstars from 3.3.6 but it behaves just like you described it. It works with ASICAP though so theres is nothing wrong with the camera.
ZWO ASI CAM are recognized but not connected #48364
I use two ASI cameras (120MC-S and 1600MM-C) at the same time on KStars 3.3.9 and do not have any problems at all. Last time I tried was on Saturday night (5 days ago). I use a Minisforum mini-pc with USB3 ports.
ASI6200 and filter wheel with a SkyWatcher Esprit 80 ED on a SkyWatcher HEQ5-Pro
ASI1600MM-Pro Cooled and filter wheel with an 8" TS Ritchey-Chrétien on a SkyWatcher EQ6-R
ZWO ASI CAM are recognized but not connected #48369
I ran Kstars 3.3.8 on a WINDOWS 8.1 laptop and have the stellarmate RPi3 remotly connected by WiFi network. A day before I experienced this problem I had numerous shutdowns and restarts of Windows because of updates. What Windows do you run guys?