I'm confused as to how I use Load and Slew in the Align module. I've tried unparking the mount and loading an image, but nothing happens. I've also tried slewing to the target and loading a previous fits image and it says there aren't enough stars in the image and the align fails.
Would appreciate some help on how to use this feature.
TS Triplet APO 80/480 FPL53+0.8 Flattener, Skywatcher HEQ5 GoTo, ZWO ASI533 MC Pro, ZWO ASI120 MM Mini, ZWO ASI EAF, Indiserver on Ubuntu-Server 22.04 LTS@telescope, remote connected to either Kubuntu-Notebook or Kubuntu-Desktop, image-procesing:PixInsight
I had Slew to Target selected. As for the steps to go through, I’ll try it tonight. Will it also rotate the image correctly? I have a Falcon Rotator and would like to know if this will take care of that as well.
in Align module, you press "Load and slew" and you select the image you want to plat slove
SW 150/750P (Newtownien) - SW ED72/420 on HEQ5 pro using EqMod
ASI071 pro - CC Baader MPCC III (for newtownien)
Guiding with 60mm refractor and QHY5 II mono
Kstars/Ekos on LENOVO Thinkcenter M71 - Linux Mint 22.04 & Stellarrmate 64
I found out how to plate solve. The problem seems to be with the Internal Solver. When I switch to the Online Solver it sort of works. It plates solves and slews but then isn't able to align the image properly. It gets close but never completes.
When I'm using the Internal Solver, I get an error message that says there aren't enough stars, so I don't know what is going on. Any advice would be appreciated.