Hi all,i'm enjoying the rare clear sky nights to try the scheduler, that looked for me a little bit tricky function.
I tried to start with a quite difficult plan : Messier Marathon, so i have a long list of jobs. I let algorythm to chose the best target.
My problem is : my scheduler stop every night jobs at 3:00 (GMT 2). Twilight is about at 5:15... I can't find a reason ...and it's quite accurate ...03:00 not 03:05 nor 02:58 ...

Here are some logs and screen capture from two nights.(some problems on guidance, but i don't think it's the reason of stop).
Thanks for your help.
Using Kstars 3.7.0 - build 2024-04-12 under Linux Ubuntu 22.04.4 LTS

Arnaud
scheduler options : see attachment
scheduler log of the 21th of april : see attachment

scheduler log of the 20th of april :
<code>...2024-04-20T03:00:35 Job 'M 96' has not been processed upon scheduler stop, marking aborted.
2024-04-20T03:00:35 Job 'M 63' has not been processed upon scheduler stop, marking aborted.
2024-04-20T03:00:35 Job 'M 105' has not been processed upon scheduler stop, marking aborted.
2024-04-20T03:00:35 Job 'M 48' has not been processed upon scheduler stop, marking aborted.
2024-04-20T03:00:35 Job 'M 52' has not been processed upon scheduler stop, marking aborted.
2024-04-20T03:00:25 Job 'M 63' is guiding, guiding procedure will be restarted in 10 seconds.
2024-04-20T03:00:25 Warning: job 'M 63' calibration failed.
2024-04-20T03:00:14 Starting guiding procedure for M 63 ...
2024-04-20T03:00:06 Job 'M 63' is guiding, guiding procedure will be restarted in 5 seconds.
2024-04-20T03:00:06 Warning: job 'M 63' calibration failed.
2024-04-20T03:00:00 Starting guiding procedure for M 63 ...
2024-04-20T03:00:00 Job 'M 63' is capturing, is restarting its guiding procedure (attempt #1 of 5).
2024-04-20T03:00:00 Warning: job 'M 63' failed to capture target.
2024-04-20T02:54:32 Job 'M 63' capture is in progress...
2024-04-20T02:54:32 Job 'M 63' guiding is in progress.
2024-04-20T02:52:19 Starting guiding procedure for M 63 ...
2024-04-20T02:52:18 Job 'M 63' repositioning is complete.
2024-04-20T02:52:17 Job 'M 63' alignment is complete.
2024-04-20T02:51:47 Job 'M 63' is capturing and plate solving.
2024-04-20T02:51:45 Job 'M 63' slew is complete.
2024-04-20T02:51:26 Job 'M 63' is slewing to target.
2024-04-20T02:51:18 Greedy Scheduler plan for the next 48 hours starting sam. avr. 20 02:51:18 2024 (0.504)s:
2024-04-20T02:51:18 M 63 04/20 02:51 --> 03:01 job completion
2024-04-20T02:51:18 M 51 04/20 03:02 --> 03:12 job completion
2024-04-20T02:51:18 M 85 04/20 03:13 --> 03:25 job completion
2024-04-20T02:51:18 M 52 04/20 03:29 --> 03:41 job completion</code>

I am not sure this is the problem but in the mount tab there is a field 'Park at' and in version 1.8.1 of stellarmateOS which I am using, this was set at 3am. Before running the scheduler I set this to 6am and have not had a problem with scheduler. However I did not run the scheduler with the 3am setting so can not be sure that this would cause your problem.

Mike

Sorry ...it's probably it ...it's so obvious...I searched in scheduler, indi ....but not there.

My proposal : in the scheduler log should appear why it's aborting.

Thanks Michael.