3.5.7 (beta)
Initial conditions: running sequence with filter changes - autofocus on filter change - checkbox selected for "supend guiding" in focuser tab
Expected result - Guiding should pause (used to)
Actual: Guiding continues and had to manually disable the two axis checkboxes (since under scheduler if you STOP guiding it will be put back ON)
This is new behavior within a couple of builds as the suspend was good in the past
I actually tried tonight for the first time to focus every 60 min.
The guiding was not suspended.
It was on different OTA (guiding - on guiding scope/camera, acquiring - on main scope/camera).
Now I know - that's by design. Worked well.
-- Max S
ZWO AM5. RST-135. AZ-GTI. HEQ5. iOptron SkyTracker.
TPO RC6. FRA400. Rokinon 135 and other lenses.
ZWO ASI2600MC. D5500 modified with UVIR clip-in filter.
ZWO ASI120MM Mini x 2. ZWO 30F4 guider. Orion 50mm guider.
ZWO EAF x 3.
Yes - I am configured to use my imaging scope via OAG - as I was having issue guiding (a mechanical issue now solved) the guider was having kittens since the focus was constantly changing due to the focus routing - this ended up in a situation where I could not focus, so position changes causing guider craziness causing focus problems-> a feedback loop of horrors
If you let me know the area in code I could write up a change and test it out - back a awhile ago I do remember seeing the guiding pause when focus was happening even with my guide scope (maybe I was dreaming )