fits issue

  • Posts: 163
  • Thank you received: 10

fits issue was created by pcxz

Hello everyone, after a long time this night I pulled out my telescope. And I have a problem with the image fits, see the attached picture, others have this problem? solution? ( Canon 500D, all settings ok, RAW .cr2 is ok)
----
Celestron C8 Fastar XLT U.S.A. (Carbon tube), seeker 9x50 (used as a guide scope), Wedge, Meade DSI (used as a guide cam), Canon EOS 500D Full mod, Canon EOS 1000D, RaspBerryPI3 with remote management through EKOS.
1 week 6 days ago #34658
Attachments:

Please Log in or Create an account to join the conversation.

  • Posts: 309
  • Karma: 2
  • Thank you received: 47

Replied by Herrhausen on topic fits issue

This pretty much looks like what I had experienced last week.



indilib.org/forum/general/4549-capture-d...s-in-git-solved.html

Make sure the camera resolution defined in

- Indi - GPhoto(Canon)_CCD - Image Settings
- Indi - GPhoto(Canon)_CCD - Image Info
- Ekos

is the same. Hope this helps.
The following user(s) said Thank You: pcxz
Last edit: 1 week 6 days ago by Herrhausen.
1 week 6 days ago #34662
Attachments:

Please Log in or Create an account to join the conversation.

Replied by knro on topic fits issue

The only changes I made recently to the driver are related to related to streaming subframing (I removed that). But I wasn't able to do focus with subframing, I always get corrupted frames with a similar pattern. I thought this was due to bayer subframing, but I need to check the code again.

The change I made on KStars side is always to ....

Oh, I just found out what caused this. Ok going to fix it now.....
Jasem Mutlaq
Support INDI & Ekos; Get StellarMate Astrophotography Gadget.
How to Submit Logs when you have problems?
Add your observatory info
The following user(s) said Thank You: pcxz
1 week 6 days ago #34671

Please Log in or Create an account to join the conversation.

  • Posts: 163
  • Thank you received: 10

Replied by pcxz on topic fits issue

Hi Herrhausen, the next time I have the chance and above all the time, to use the telescope, I will control it, but now time is always less.
I had read your message, and completely deleted the settings from the raspberry and as you can see from the attached images also ekos should be affixed.

Thanks and clear skies.

Excuse my english, I translate from google.
----
Celestron C8 Fastar XLT U.S.A. (Carbon tube), seeker 9x50 (used as a guide scope), Wedge, Meade DSI (used as a guide cam), Canon EOS 500D Full mod, Canon EOS 1000D, RaspBerryPI3 with remote management through EKOS.
1 week 6 days ago #34672
Attachments:

Please Log in or Create an account to join the conversation.

Replied by knro on topic fits issue

I just fixed the issue, please recompile indi-gphoto from INDI Git.
Jasem Mutlaq
Support INDI & Ekos; Get StellarMate Astrophotography Gadget.
How to Submit Logs when you have problems?
Add your observatory info
The following user(s) said Thank You: pcxz
1 week 5 days ago #34694

Please Log in or Create an account to join the conversation.

  • Posts: 309
  • Karma: 2
  • Thank you received: 47

Replied by Herrhausen on topic fits issue

Could not find any issues. Preview, LiveView and queue work as they should. Indi started with CCD-Information width and height fields = 000. After resetting camera resolution in KStars the values were correctly inserted in their corresponding Indi fields.
Last edit: 1 week 5 days ago by Herrhausen.
1 week 5 days ago #34698

Please Log in or Create an account to join the conversation.

Time to create page: 0.479 seconds