×

INDI Library v1.9.7 Released (29 Jul 2022)

Bi-monthly INDI Library released with new drivers and bug fixes.

Moon 01.12.2020 in L(HDR)RGB

  • Posts: 271
  • Thank you received: 72
Full mon from Dec 1th 2020 in LRGB

For this integration I collected a total of 10.000 subs in the .ser format. At Unity gain and -25c i shoot 2.000 subs for LRGB each. I then shoot 2.000 L with a gain of 100, for a HDR L channel. All RGB subs was at 2ms exposure, and all L channel was at 1ms.

Each .ser file was stacked in Autostackert!, then aligned using the FFTRRegistration in PixInsight.

The L channels was combined with HDRComposision, then some curves and unsharp mask. RGB channels was combined, saturated and added to the L channel with pixel math.

I then upscaled the image by 2x.

Scope Equinox 80 PRO APO
ZWO Asi 1600mm-c @-25c
ZWO LRGB filters
Need to get a 2x barlow for these full moon nights :)

Everything controlled via EKOS and Indi ControlPanel, except FireCapture for streaming .ser with the asi 1600mm-c

Hope you like, and Clear skies!



Also on SGL stargazerslounge.com/gallery/album/4302-observatory-17b/
and observatory17b.com
Proud owner of Observatory 17b - A remote Linux observatory.
Website: Observatory 17b
Build thread @ SGL: Starting summers observatory project
The following user(s) said Thank You: Jasem Mutlaq, Jim
Last edit: 1 year 8 months ago by Magnus.
1 year 8 months ago #63717
Attachments:

Please Log in or Create an account to join the conversation.

Beautiful!!

Regarding SER recordings, have you tried SER recording in INDI 1.8.7? It improved by quite a bit.
Jasem Mutlaq
Support INDI & Ekos; Get StellarMate Astrophotography Gadget.
How to Submit Logs when you have problems?
Add your observatory info
The following user(s) said Thank You: Magnus
1 year 8 months ago #63724

Please Log in or Create an account to join the conversation.

  • Posts: 271
  • Thank you received: 72

Replied by Magnus on topic Moon 01.12.2020 in L(HDR)RGB

Hi Jasem, and thanks :)

Last time I tried the streaming in INDI was ~ two months ago, not sure if I was on 1.8.7 then, or when 1.8.7 was out?
When I tried it then, everything seamed to work. All the controlls, and streaming preview. However when I opened the file in ser player it was just a lot of noise. (It did roughly show the outline of the moon, but no usable image).

I can test it again next time I get some clear skies, and the moon is there. Longtime weather only shows rain, so might be a while.
Proud owner of Observatory 17b - A remote Linux observatory.
Website: Observatory 17b
Build thread @ SGL: Starting summers observatory project
1 year 8 months ago #63729

Please Log in or Create an account to join the conversation.

Moderators: OlegChristian
Time to create page: 0.540 seconds