See the other thread I referenced.. There is a problem with that one section of the compile now (recent issue I believe).. I have it installed now, but needed to comment out that one line in the compile scripting..
Jay are you running my build-soft-latest or stable? From that error message it seems like you run latest which can break from time to time.
As Jerry pointed out compiling on 4GB Pi with 64bit system need to lower number of jobs. So edit scripts and change line "
JOBS=$(grep -c ^processor /proc/cpuinfo)" to
"JOBS=2". 8GB Pi should be fine.
Richard: did you right clicked on script name and selected save target as? Because you obviously saved HTML webpage that show script and not script itself. But it seems like you figured it out in the end.
I tried both, as well as running on an 8GB RPI4.. Also running the GIT and downloaded (based on RIchard's experience).. Running STABLE gave a similar compile error, but for a different line as I recall. I can delete and retry, but I think the STABLE will fail as well if it's calling for the same location in the line I commented out (81)...
Did you happen to look over this newer thread? kstars build issue with updated stellarsolver
Which and where in the scripts is the JOBS operand if you can.. There are a lot of scripts!!
Up and running and PHD2 installed on top! Now, hope it just stays stable for a bit!!! . Anyone know if there's a build that includes Pegasus Astro Power Box (or is it included??). Thank you everyone!!!
Thanks.. This brings up another question or aspect... Is there a standalone INDI Server Control Panel application to see all of the connections, etc..? I know there is something built into Ekos, but I'm looking for something more akin to one that's available for INDIGO Server application from Cloudmakers (software for the Mac)...
i have successfullyy compiled the Indi librairies, stellarSolver and Kstars using the bash scripts from Nou, thanks to him. I only faced an issue for the "Celestron" indi 3rd party driver the first time i tried, there were some missing dependencies in the script.
So the 3 drivers Eqmod, Gphoto and QHYCCD work very well for me up to now, with Kstars/Ekos even if i have not yet tested it in the field.
i have 2 points
I can't find the GSC source (for plate solving using Simulators), i'd like to compile it.
Do you know how to configure the raspberry to create automatically an Wifi Hotspot and start a VNC server, as Astroberry and Stellarmate do ?
SW 150/750P (Newtownien) - SW ED72/420 on HEQ5 pro using EqMod
ASI071 pro - CC Baader MPCC III (for newtownien)
Guiding with 60mm refractor and QHY5 II mono
Kstars/Ekos on LENOVO Thinkcenter M71 - Linux Mint 21 & Stellarrmate Pi4 8GB
2 I have built a full suite around RaspberryPi64 running KDE desktop. The built-in Network Manager allows me to create a hotspot automatically if the internet connection fails, and also to use Dolphin file manager to transfer files via GUI between the Pi and my Mac (or Linux or Windows box), on which I am using RealVNC viewer to log on to whichever of Internet or Hotspot is available. I can also leave the files on the Pi,( which is in an ArgonOne SSD enclosure which has integrated fan and a very good wifi performance without an external aerial) for transfer via Network cable or USB3 cable later.
I find this very flexible. On the Pi I am running either KStars or CCDCiel, with IndiStarter. When using CCDCiel I also use EQMODGUI (on above SourceForge link). I aso have CdC, HNSky, ASTAP, PHD2, Entangle (DSLR control), and Timeshift.
Now I need some decent skies!
If there is any interest I can describe this setupt better at length, but will be away on holiday for a while.