Nothing to worry about. Because -in the absence of gremlins- the simulator is perfectly polar aligned the result of my first try was not a triangle but a short green line. So you are right: to work with the simulator you have to misalign the simulator.
I think so, although I haven't used the software mount control before to execute a precise angular movement. I suppose if the 60° could be activated automatically when you click on the start button that woulld be ideal!
Currently running KStars/Ekos/Indi on two Raspberry Pi 4Bs 4GByte under Raspberry Pi OS thanks to Astroberry
Two mounts, two Fracs, a Newt and a Mak and a couple of OSC cameras.
I want to make sure you understand that this is experimental software that is not yet released. I've tested best I can, and the next step moving towards a release is getting volunteers to use/test the software and (gently) feed back bugs and suggestions for improvements. You can be a tester if you like--in fact I'd love to have southern hemisphere testers.
Given that disclaimer, here are two possible ways to get the program (do one or the other):
1) Compile KStars from source. Many people who test early software on the forum have the capability to compile KStars. If that is you too, great! If you're not used to compiling software, probably best to try approach #2. To compile and install, follow the instructions in: indilib.org/forum/general/210-howto-buil...st-libindi-ekos.html (probably you just need the KStars part).
In those instructions, I'd replace -DCMAKE_BUILD_TYPE=Debug with -DCMAKE_BUILD_TYPE=RelWithDebInfo
2) Download the "nightly build". See the "Nightly Builds" section in: indilib.org/download.html. These instructions apply to Linux. I don't know how to get Mac or Windows nightly builds, but it may be possible--if someone knows, please reply. I just checked and this new polar-align code is included in the current nightly build for the Ubuntu 20.04 linux system I have. After you've installed, make sure that when you run kstars, in the KStars --> Help --> About KStars menu it says "Version 3.5.2 Beta".
Again, note that you'll be getting the latest experimental KStars and Indi code, not the more tested releases. You may get other changes besides this one.
You should be able to go back to the standard release following the instructions also on indilib.org/download.html.
Feel free to follow-up if you have further questions,
Reporting bugs and suggestions on this thread is fine.
Most of the details you need should be in my original posting above, but, of course, feel free to post questions.
Also, as I mentioned, I've only tested with the simulator for southern hemisphere, so I'm looking forward to live tests from the south.
I compiled the latest build on Astroberry, and the new polar alignment seems to work very well! Thanks a lot! A miss Polaris of about 10 degree so I could not use the old one. I tried pointing near the meridian about 20 degree south of the North Pole and the new procedure allowed me to align to about 2’ quite easily (value confirmed also by phd2).